Product Description

Introduction:

Oval Charcoal Machine is mainly used to briquette charcoal leftover, small pieces of charcoal, charcoal waste, etc. and make them be fully used to increase its economic value. The final briquette shape and size both can be customized from 25-60mm with oval, pillow and square shape as well as other favorite shapes in market. according to special requirement. In addition, the raw material range is very widely, like coal powder, fertilizer, salt, iron powder, and gypsum, chrome, copper, etc.

Structure:

(1) We offer three types of pressure: spring disc, wedge block and hydraulic

Hydraulic type has larger pressure, even some uneasy shaping materials, such as dry powder, fertilizer, salt, etc, can also press in good shape, the pressure can be adjusted according to different raw material. 

(2) Because charcoal fines is just a little light, easy to be molded. The roller material adopts 65Mn is enough. Normally, this kind of roller can use 8-10 month.

(3) We also produce four-rollers Oval Charcoal Machine : in order to reduce density between charcoal fines and make best quality charcoal briquettes, we design four rollers charcoal fines briquetting machine, which can press charcoal fines two times. 

 

(1) For BBQ charcoal fines briquetting machine, we offer three types of pressure: spring disc, wedge block and hydraulic.

(2) Charcoal fines is just a little light, easy to be molded. The roller material adopts 65Mn is enough. Normally, this kind of roller can use 8-10 month.

(3) In order to increase density of final charcoal briquettes, we design four rollers type, which can press charcoal fines two times. 

http://www.briquettingcn.com

Cell: 0086-15978436639

Email:  lixingchen0822@126.com

 

Customer Notice:

(1) Inlet raw material need less than 5mm, as all know, the smaller the material, the better the briquettes. 

(2) The material can't be mixed with metal material, or the mold is easily damaged. 

(3) The raw material moisture need be controlled between 12%-15%. 

(4)  A certain proportation of binder and charcoal fines, we will offer details after we finished the order for free. 

 

Model	Reducer	Ratio	Roller Size     (mm)	Main Shaft Speed   (r/min)	Matched Power   (kw)	Capacity    (t/h)	Pressure Type
XM290	ZQ350	1:31.5	290*200	12-14	5.5	0.9-1.0	Mechanical
XM360	ZQ350	1:31.5	360*250	12-14	7.5	1.5-2.0	Mechanical/Hydraulic
XM400	ZQ400	1:31.5	400*250	12-14	7.5	2.5-3.5	Mechanical/Hydraulic
XM430	ZQ400	1:31.5	430*250	12-14	11	3.5-4.5	Mechanical/Hydraulic
XM500	ZQ650	40.17	500*470	10-12	37	7.5-8.5	Mechanical/Hydraulic
XM650	ZQ850	40.17	650*470	9-11	45	9-10	Mechanical/Hydraulic
XM750	ZQ1000	48.57	750*570	9-11	90	13-14	Mechanical/Hydraulic
XM850	ZQ1250	50	850*570	8-10	110	15-17	Mechanical/Hydraulic
Remarks	1. Above capacity is based on coal density 0.8, briquette size Φ50*33mm.
	2. Roller material is 65Mn, High chromium alloy and 9Cr2Mo.
	3. According to different material, parameter will change slightly.

 

Payment Terms︰ 30% T/T in advance, 70% before shipment or against B/L copy

Product Image