coal briquettes molding machine Introduction:
(1) Briquette making machine can mold a variety of mineral powder, metal powder, coal powder, coke powder and other materials.
(2) Due to forced squeeze by roller, the products have high density, high strength and high hardness.
(3) The press roller uses 65Mn rigid material is in good abrasion resistance, effectively prolong service life.
coal briquettes molding machine features:
(1) Main motor transmit power to speed reducer.
(2) The coupling between reducer and rollers start to run.
(3) The exposed gear impel drive and driven shaft to rotate synchronize
(4) The pressure in two rollers increase gradually, from small to large.
(5) Pressure reaches top, the briquettes is molded successfully.
coal briquettes molding machine technical parameter:
XM Series Coal Briquetting Machine
| Model |
Reducer |
Ratio |
Roller Size(mm) |
Main Shaft Speed(r/min) |
Matched Power(kw) |
Capacity(t/h) |
Pressure Type |
| XM290 |
ZQ350 |
1:31.5 |
290*200 |
12-14 |
5.5 |
0.9-1.0 |
Constant Pressure |
| XM360 |
ZQ350 |
1:31.5 |
360*250 |
12-14 |
7.5 |
1.5-2.0 |
Constant Pressure/Hydraulic Pressure |
| XM400 |
ZQ400 |
1:31.5 |
400*250 |
12-14 |
7.5 |
2.5-3.5 |
| XM430 |
ZQ400 |
1:31.5 |
430*250 |
12-14 |
11 |
3.5-4.5 |
| XM500 |
ZQ650 |
40.17 |
500*470 |
10-12 |
37 |
7.5-8.5 |
| XM650 |
ZQ850 |
40.17 |
650*470 |
9-11 |
45 |
9-10 |
| XM750 |
ZQ1000 |
40.17 |
750*570 |
9-11 |
90 |
13-14 |
| XM850 |
ZQ1250 |
50 |
850*570 |
8-10 |
110 |
15-17 |
| Remarks: Above capacity is based on material specific gravity 0.8, briquette size: φ50*33mm |
| Roller material is 65Mn, high chrome alloy and 9Cr2Mo |
According to different material adjust machine parameter to meet customer production
|
